PRESIDENT RONALD 10/12 M Manuel D'utilisation page 23

3. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
deactivate Of the KEY BEEP function.
4. New press PUSH knob (5) permits to
blinking. a) Return to point 1 to
validate exit
switch (10) to and
5. If no key is pressed, the unit exits
on F (7) key.
When the function is activated, a beep sounds when key is pressed, changing
the channel etc. "BP" appears on the display when the function is active.
Default value is On.
3) ROGER BEEP
Press for 2 seconds F (7) key to access
1. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function.
2. Press PUSH knob (5). The current parameter blinks on LCD.
3. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
deactivate Of the ROGER BEEP function.
4. New press PUSH knob (5) permits to
blinking. a) Return to point 1 to
validate exit
switch (10) to and
5. If no key is pressed, the unit exits
press on F (7) key.
When the function is active, appears on LCD.
The Roger Beep sounds when the PTT switch (10) on the microphone is re-
leased in order to let your correspondent speak. Historically as transceiver
is a "simplex" communication mode, it is not possible to speak and to listen
at the same time (as it is the case with a telephone). Once someone had
finished talking, he said "Roger" in order to prevent his correspondent that
it was his turn to talk. The word "Roger" has been replaced by a significant
beep. There comes "Roger beep" from.
Default parameter is Of.
4) EMG SET 1
Press for 2 seconds F (7) key to access
1. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function.
2. Press PUSH knob (5). The priority channel blinks on LCD.
3. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
priority channel 1.
4. New press PUSH knob (5) permits to
channel stops blinking.
activate
validate the choice. The parameter stops
select another function to set or b) Press PTT
MENU.
MENU after 10 seconds or by a new press
to MENU. is displayed.
activate
validate the choice. The parameter stops
select another function to set or b) Press PTT
MENU.
MENU after 10 seconds or by a new long
to MENU. is displayed.
validate the choice of the channel. The
5. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
On/
frequency band in segments:
page 25).
6. New press PUSH knob (5) permits to
band stops blinking. The third parameter, the mode, blinks.
7. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
mode AM or FM .
8. New press PUSH knob (5) permits to
stops blinking. a) Return to point 1 to
PTT switch (10) to
9. If no key is pressed, the unit
press on F (7) key.
Default programmed Priority Channel 1 is 9.
See § EMG 1/2 page 20.
select
the
5) EMG SET 2
On/ Press for 2 seconds F (7) key to
1. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function.
The points 2 to 9 are identic to those of EMG SET 1 page 23.
Default programmed Priority Channel 2 is 19.
See § EMG1/2 page 20.
6) ECHO SET
Press for 2 seconds F (7) key to
1. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
function.
2. Press PUSH knob (5). The delay of the ECHO blinks on LCD.
3. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
value of the delay from 1 to 32 (default value is 32).
4. New press PUSH knob (5) permits to
stops blinking. The second parameter, time, blinks.
5. Use UP/DN keys (11) on the microphone or turn PUSH knob (5) to
value of time from 1 to 32 (default value is 32).
6. New press PUSH knob (5) permits to
blinking. a) Return to point 1 to
select the
validate
switch (10) to
7. If no key is pressed, the unit exits
press on F (7) key.
select the
23
validate the choice of the band. The
validate
the chosen mode. The mode
select another function to set or b) Press
validate and exit MENU.
exits MENU
after 10 seconds or by a new long
access
to MENU.
access
to MENU.
validate the value of the delay. The delay
validate
the value of time. The time stops
select another function to set or b) Press PTT
exit
and MENU.
MENU after 10 seconds or by a new long
select the
(see BAND NAME
select
the
is displayed.
select the
is displayed.
select the
define the
define the