Appendix 3. Declaration Of Incorporation - flamco Flamcomat AS-IWZ-16 Installation Et Mode D'emploi

Appendix 3. Declaration of Incorporation

as per EC Machinery Directive 2006/42/EC Annex II B B for partly
completed machinery
__________________________________________________________________
Manufacturer
Flamco STAG GmbH
Berliner Chaussee 29
DE - 39307 Genthin
Germany
Description and identification of the partly completed machine
Product/Article
Type
Serial numbers
Project numbers
Trade name
Function
I hereby declare that the following essential requirements of the Machinery Directive 2006/42/EC have been met
1.1.7, 1.1.8, 1.3., 1.3.7, 1.5.1, 1.5.2, 1.5.6, 1.5.13, 1.5.15, 1.5.16, 1.6.1, 2.2.1, 2.3, 3.2.1, 3.2.2, 3.3.4, 3.4, 3.4.3, 3.4.5, 3.5.1, 3.5.2,
3.6.1, 3.6.2, 4.1.2.1, 4.1.2.2, 4.1.2.3, 4.1.2.4, 4.1.2.5, 4.1.2.6, 4.1 .2.7. 4.1.2.8, 4.1.3, 4.2.2, 4.2.3, 4.3.1, 4.3.2, 4.3.3, 4.4.1, 4.4.2, 5.1,
5.2, 5.6, 6.1.1, 1.1.2, 6.3.1, 6.3.2, 6.3.3, 6.4.1, 6.4.3, 6.5
I further declare that the relevant technical documentation described in Annex VII, part B has been prepared;
I expressly declare that the partly completed machine fulfils all the pertinent provisions of the following EC
directives
2006/42/EC
2006/95/EC
97/23/EC
The manufacturer or the authorised representative undertakes to transmit, in response to a reasoned request by the national
bodies, relevant information on the partly completed machinery. Said transmission shall be effected on paper.
Intellectual property rights remain unaffected by this!
Please note! The partly completed machine must not be put into service until the final machinery into which
it is to be incorporated has been declared in conformity with the provisions of this Directive.
Genthin, 29/09/2014
Place, date
12
Declaration of Incorporation
Draining device (AS)
AS draining device
17650,17651, 17652,17653
PRJ-2014-09-29-0 001
Modules for controlled draining (Flamcomat with SPC)
Draining device of system water from larger systems in which the volume of the expansion
vessel is not sufficient (to collect the system water at full expansion.)
Directive 2006/42/EC of the European Parliament and Council of 17 May 2006 on machinery, and
amending Directive 95/16/EC. (new version) (1)
Directive 2006/95/EC of the European Parliament and Council of 12 December 2006 on the
harmonisation of the laws of Member States relating to electrical equipment designed for use within
certain voltage limits.
Directive 97/23/EC of the European Parliament and Council of 29 May 1997 on the approximation
of the laws of the Member States concerning pressure equipment.
person established in the Community, who
is authorised to compile the relevant technical
technical documents
Sabine Pietsch
Flamco STAG GmbH
Berliner Chaussee 29
DE - 39307 Genthin
Germany
'
Signature
Roland Kiesswetter, Team Lead R&D
ı