List Of Materials; Parts Not Supplied - Elica ECL630S4 Guide D'utilisation, D'entretien Et D'installation

LIST OF MATERIALS

Removing the packaging.
I CAUTION
Remove carton carefully, wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly and
LED lamps already installed
6x80 mm
6x16 mm
3.5x9.5 mm
4.2x19 mm
Drip tray screws
Torx 20 adapter
Tools/Materials required
• Level
• Drill with 1 ⁄ " (3.0 cm),
1 1
4
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Saber or keyhole saw
• Metal snips
• Screwdrivers:
- Phillips
- Flat-blade
6
Pieces
1
4
5
4
6
4
1
⁄ " (3.0 mm), ⁄ " (4.8 mm) drill bits
1
8 1 6
Supplied Part
10" round air transition
Ø 6.4x11 mm washers
Ø 5.3x20 mm washers
10x50 mm wall anchors
Drip tray bracket
Parts no supplied
Parts needed
• Home power supply cable
• 1 - ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Drip tray
Pieces
1
5
2
2
30", 36", 42": 1
48": 2
30", 36", 42": 2
48": 3