Before First Use; Assembling And Attaching The Blender - SOLIS MASTER CHEF 834 Mode D'emploi

OPerATInG YOUr SOLIS
MASTer CheF BLender

Before first use

Before using your Solis Master Chef Blender for
the first time, remove any packaging material
and promotional labels. Ensure the appliance is
switched off at the power outlet and the power
cord is unplugged.
Wash the lid, inner lid, blender jug and blade
assembly (refer to Disassembling the blender jug
on Page 40) in warm, soapy water with a soft cloth.
Rinse and dry thoroughly. The motor base can be
wiped with a damp cloth. Dry thoroughly.
The lid, inner lid, blade assembly and silicon seal
may be washed in the dishwasher in the top shelf
only on a standard wash. The blender jug may be
placed in the bottom shelf.
assemblInG and
attachInG the blender
Step 1
To reassemble the blender jug, replace the silicon
seal onto the blade assembly. (see fig. 1)
Fig. 1
Anl_MasterChefBlender_2.indd 37
nOTe:
Ensure that the silicon seal is carefully placed com-
pletely around the blade assembly, prior to inserting
into the jug, as this will prevent leakages.
Step 2.
Upturn the blender jug and insert the blade
assembly into the jug base. (see fig.2)
Fig. 2
Step 3
Twist the Blade Removal System anticlockwise until
firmly locked into position. (see fig. 3)
Fig. 3
Step 4
Place the motor base on a flat, dry surface such as
a bench top. Ensure that the motor base is switched
off at the power outlet and the power cord is
unplugged. Turn the blender jug upright and insert
E
37
12.6.2008 10:47:24 Uhr