First-Time Operation; Description Of The Operating Elements - HumanTechnik CM-BT2 Mode D'emploi

First-Time Operation

Description of the operating elements

1 Neckloop
2 Status indicator
5 Additional volume
setting for the teleloop
6 Volume setting
for the teleloop /
headphones
7 Headphones and charger connection
18 English
3 Integral microphone
4 Function key
1 Neckloop
2 Status indicator
- Red light is visible
- Red light flashes slowly
- Blue/red light flashes alternately
- Blue light flashes every
3 seconds
- Blue light is visible for 1 second
every 5 seconds
3 Integral microphone
4 Function key
Switching the »CM-BT2« on / off
Call answer / call termination key
Pairing key
5 Additional volume setting for the neckloop
The volume of the neckloop can be increased independently using
this control dial.
6 Volume setting for the neckloop / headphones
The volume of the neckloop/headphones can be adjusted with
both of these keys.
7 Headphones and charger connection
This 3.5 mm jack can be used to connect the headphones or charge
the CM-BT2 with the charging cable.
»CM-BT2« is switched off
-
Warning: battery low
-
Pairing mode
-
Connection attempt
-
Connection made with
-
device
English 19