Location And Building In; Important - Gram K 200 Mode D'emploi

ENGLISH

Location and building in

The cabinet should be placed in a room which is dry and sufficiently ventilated. To operate
efficiently it should not be positioned in direct sunlight or near warm appliances. Please note
that optimal cabinet performance is obtained at an ambient temperature between +16°C and
+35°C.
K/KG 200/400: By placing the cabinet in an environment with high air humidity, it might be
necessary to acquire extra equipment for re-evaporation of the drip water in the re-
evaporation pan over the compressor. This equipment can be bought as extras.
Stainless steel cabinets: Avoid placement of the cabinet in a chlorine/acid-containing
environment (swimming-bath etc.) due to risk of corrosion.
The cabinet can be installed freestanding against a wall or it can be built under a worktop.

Important

The cabinet must have sufficient ventilation and free air circulation beneath, above and
behind the cabinet.
The cabinet legs under the cabinet and the spacers at the rear of the cabinet ensure
sufficient air space.
The drawings show how much air space is needed.
A shows a refrigerator free-standing against a wall.
B shows a refrigerator installed under a worktop (K/KG/F 200).
Note the necessary clearance between refrigerator and worktop. This dimension must be
maintained to ensure air circulation.
If the refrigerator is installed under a worktop and this dimension cannot be observed, air
circulation must be provided by making an extract channel in the worktop.
76-504-0940
12