Location - Gram Compact 610 Mode D'emploi

Location

When receiving the cabinet, check the packaging material for damage.
If any damage occurs at the packaging material, it should be considered if the cabinet might
have been damaged too. If the damage is substantial, please contact your dealer.
How to remove the transport pallet:
The cabinet is tilted slightly backward, and the front part of the pallet can be removed.
Then the cabinet is tilted slightly forward, and the rear part can be removed.
This task requires at least 2 persons.The heaviest part of the cabinet is at the
top. Be aware of this, when removing the transport pallet.
Fig.1
If the cabinet has been transported in horizontal position it must stand upright at
least 2 hours before it is started to allow the oil from the compressor to run back.
765041572 Rev. 002 32