Cleaning/Maintenance; General Cleaning And Maintenance Work; Replace The Snow Shovel's Edge; Replace Rubber Rim On The Auger - Grizzly ESF 2046 L Traduction De La Notice D'utilisation Originale

GB
• Remove any blockages carefully with a
piece of wood or plastic.
Do not use any hard or sharp objects,
as these could damage the machine.

Cleaning/Maintenance

Have work that is not described
in these instructions carried out
by a customer service centre that
we have authorised. Use only
original parts.
Before any maintenance and clean-
ing works are carried out: Switch
the machine off, disconnect the
power lead and ensure that all mov-
able parts have stopped moving.
There is a risk of personal injury.
General Cleaning and Mainte-
nance Work
Do not jet water onto the appli-
ance and do not clean it under
flowing water. This would result
in the danger of an electric shock
and the trimmer could be dam-
aged.
• Keep the ventilation channels, motor
housing and handles of the machine
clean. Use a damp cloth or a brush to
clean them.
Do not use any cleaning agent or sol-
vent. This could damage the machine
irreparably.
• Clean the ejector chute and the auger
of any snow residues after each use.
• Prior to every use, check the appliance
for obvious defects such as loose,
worn or damaged parts. Check that
all nuts, bolts and screws are sitting
50
firmly.
• Check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary.
Replace the snow shovel's
edge
1. Turn the machine on its side.
2. Release the 4 cross-head
screws (14a) on the snow shov-
el's edge (14) and replace them.
3. Insert the new snow shovel
edge (14) and screw it again.
Replace rubber rim on the
auger
1. Unscrew the top shift rod (
and the central bar (
turn the machine over.
2. Release the 12 cross-head
screws, washers and nuts (28a)
on the 6-part rubber rim (28)
and remove them from the au-
ger (15).
3. Insert the new rubber rims (28)
on the auger (15) and re-tighten
them.

Storage

• Leave the machine to thaw and dry
before you store it.
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not wrap plastic sacks around the
appliance as this could result in the
formation of moisture and mould.
5)
7) and