Grizzly ESF 2046 L Traduction De La Notice D'utilisation Originale page 47

• Turn off the appliance, unplug it from
the mains and check that all moving
parts are at rest:
- Whenever you leave the machine,
- Before cleaning the ejection hole or
removing blockages,
- When the equipment is out of use,
- Before checking, cleaning or work-
ing on the equipment,
- If the power cable is damaged or
frayed,
- If the equipment has hit a foreign
object or if strange vibrations occur
during work. In this case, check the
equipment for damage and have it
repaired if applicable.
Any vibration generally indicates a
malfunction.
Maintenance and Storage:
• Ensure that all nuts, bolts and screws
are tightened firmly and the equipment
is in safe working condition.
• Have any necessary repairs carried
out to damaged parts.
• Do not attempt to repair the equipment
yourself unless you have been trained
to do so. Any work not specified in
these instructions is to be carried out
only by customer service centres that
we have authorised.
• Keep the equipment in a dry location
and out of reach of children.
• Handle the equipment with care. Keep
tools sharp and clean, in order to facili-
tate better and safer work. Follow the
maintenance instructions.
• Maintain or replace any stickers that
have been applied to the machine.
This will ensure that safety information
and information on the operation of the
machine is always available.
Electrical Safety:
Caution! The following states how
to avoid accidents and injuries due
to electric shock:
• Ensure that the mains voltage matches
the specifications on the rating plate.
• Connect the equipment only to a
socked with a residual current-oper-
ated protective device (RCD) with a
release current of more than 30 mA.
• Avoid bodily contact with earthed parts
(e.g. metal fences, metal posts).
• Use only authorised power cables of
type H05RN-F, which are no more than
75 m long and suitable for outdoor use.
The power cable wire cross section
must be at least 2.5 mm
pletely unroll cable drums before use.
Check the cable for damage.
• To fix on the power cable, use the cable
suspension intended for the purpose.
• Hold the extension cable away from
the auger when working and always
guide the power lead behind the per-
son operating the machine. The power
cable could be damaged and lead to
contact with live parts.
• Do not use the power cable to pull the
plug from the socket. Protect the power
cable from heat, oil and sharp edges.
• Switch off the equipment and discon-
nect the plug from the socket if the
power cable is damaged.
• Do not connect a damaged power ca-
ble to the mains. Do not touch a dam-
aged power cable when it is connected
to the mains. Risk of electric shock!
• If the power cable is damaged, it must
be replaced by the manufacturer, the
customer services of the same, or a
qualified person, in order to avoid haz-
ards.
GB
. Always com-
2
47