General
IMPORTANT! Prevent unintentional
!
starting by removing the ignition cable
from the spark plug.
Handle
Assembly
Top handle
•
Place the handlebar's tubular construction in direct
opposite to the lower part of the handlebar.
•
First, position the guide screw in the lower pipe in the
handle.
•
Then, center one of the holes for the fixing screw to
the hole in the handle.
•
Fit the screw, washer, and knob. Tighten the knobs
properly.
•
Use enclosed cable holder to secure cables to the
handle. Do not overstretch cables when mounting.
22 – English
ASSEMBLING AND ADJUSTMENTS
Settings
•
Loosen the lower knobs.
•
Dismantle the knob, washer, and screw.
•
Adjust to a suitable height with the fixing screw in one
of the three holes.
•
Fit the screw, washer, and knob. Tighten the knobs
properly.