Wiring - BASETech 75 18 18 Notice D'emploi

Wiring

Internal
siren
Main unit
Jumper
Window Window
Magnetic contacts
1. Connect the magnetic contacts in series and link them to the N.C. contacts at terminals 1 and 2.
2. Connect the red cable (+) of the piezo siren to terminal 3.
3. Connect terminal 4 to the 12 V DC (+) terminal 5.
4. Connect the black cable (-) of the piezo siren to the 12 V DC (-) terminal 6.
5. Connect the white cable with the grey stripes (+) from the mains adaptor to the 12 V DC (+) terminal 5 and
the white cable (-) to the 12 V DC (-) terminal 6.
6. Set jumpers A, B and C to position 1.
Magnetic contacts
Window Window
Door
Exterior siren
Door Window Window
Mains adaptor
Mains
adaptor
External siren
Black
Red
25