Extended Features; Light Control - Waldmann CHORUS LCS 455/2 Mode D'emploi

Instructions for Use Uplighter LC(S/T/A) 455 „CHORUS"
GB
Extended features (LC* /P version only)
Fig. 25
25.7
25.6
25.8
25.9
LC* = LCS, LCT, LCA
42
External switching
This function is normally switched
off, that is, the light does not
switch on automatically when the
power is supplied from an external
place (switched socket).
If this function is active, the light
switches to the level which was
set last when the power supply is
switched on.

Light control

The standard setting of this func-
tion is "ON" , that is, the light control
is active.
The light work as a dimmable light,
with the light control switched
off.
Presence sensor
The standard setting of this func-
tion is "ON" , that is, the presence
control is active.
With the presence sensor switched
off, the light intensity can be con-
trolled or dimmed.
Reduced presence sensor
range
The standard setting of this func-
tion is "OFF" , that is, the presence
sensor is set to normal sensitiv-
ity.
The presence sensor works with
a reduced range if the function is
set to "On" .
Switch-on automatic
The standard setting of this func-
tion is "ON" , that is, the light is
automatically switched on when
there is a person present or in case
of insufficient light.
The light has to be switched on
manually even if a presence was
detected if the switch-on automatic
is inactive.
Note: If the switch-on automatic
and the light control are set to
"ON" and the presence sensor is
set to "OFF" , the light is switched
on automatically if the light is below
the desired light level.