Playable Types Of Files; Supported Audio Formats; Specifications - Sony HT-CT390 Mode D'emploi

Playable types of files

Codec
MP3 (MPEG-1 Audio
Layer III)
AAC
WMA9 Standard
LPCM
Notes
• Some files may not play depending on
the file format, the file encoding, or the
recording condition.
• Some files edited on a PC may not play.
• The system does not play coded files such
as DRM and Lossless.
• The system can recognize the following
files or folders in USB devices:
– up to 200 folders
– up to 150 files/folders in a single layer
• Some USB devices may not work with this
system.
• The system can recognize Mass Storage
Class (MSC) devices.

Supported audio formats

Audio formats supported by this system
are as follows.
• Dolby Digital
• DTS
• LPCM 2ch
• AAC
28
US
Extension
.mp3
.m4a
.wma
.wav

Specifications

Bar Speaker (SA-CT390)
Amplifier section
USA models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels
driven, from 200 Hz – 20,000 Hz; rated
35 watts per channel minimum RMS
power, with no more than 1% total
harmonic distortion from
250 milliwatts to rated output.
POWER OUTPUT (reference)
Front L/Front R: 100 W (per channel at
4 ohms, 1 kHz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R:
50 W + 50 W (at 4 ohms, 1 kHz, 1%
THD)
POWER OUTPUT (reference)
Front L/Front R: 100 W (per channel at
4 ohms, 1 kHz)
Inputs
USB
ANALOG IN
TV IN OPTICAL
Output
HDMI OUT TV (ARC)
HDMI section
Connector
Type A (19pin)
USB section
(USB) port
Type A
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power Class
1
Maximum communication range
Line of sight approx. 25 m (82 ft)
1)