REMIS REMIcare van Notice De Montage page 8

A5
US/GB
A6
A7
Step 4: (Installing the insect protection door)
A8
A9
A10
8/17
A5+A6:
Push the fixation bracket into the provided notch as shown
in picture A5 before screwing the frame corner with the
guiding. Make sure that the brush is placed in the brush
notch of the frame corner and that the string is guided
above the head piece (see picture A6).
Use the 2.9x19mm cheese-headed screw.
A7:
Screw the bottom frame corner onto the coffer profile by
using cheese-headed screw 2.9x19mm. Place the handle
bar so that the bottom head piece of the handle bar gears
into the floor profile and the top headpiece into the up-
per guiding. Make sure that the string is guided above the
head piece.
A8:
Press the shutter, round part up, into the coffer notch and
fixate it with some adhesive tape, if necessary. At the top,
the shutter needs to be positioned in line with the frame
corner.
A9+A10:
Position the insect protection door in the door frame so you
can push the shutter between the rubber joint of the door
section and the kitchen furniture.
We recommend the top guiding and the floor profile to be
held by one person each while positioning the insect pro-
tection door.