Charging The Skinvivid; Preparation - Silk-n SKINVIVID TB-1389 Mode D'emploi

5.2

Charging the SkinVivid

EN
It is normal for the SkinVivid to become warm while
charging.
1. Make sure that the SkinVivid is switched off.
2. Completely unwind the USB charging cable
3. Insert the jack plug of the USB charging cable in the charge
connector
4. Insert the USB plug of the USB charging cable in the USB jack of
the USB mains adapter
5. Insert the USB mains adapter in a properly installed socket.
The charging indicator
ing process. The charging time for fully charging the rechargeable
battery of the SkinVivid amounts to approx. 3 hours.
6. Once the rechargeable battery is fully charged, the charging
indicator will illuminate in blue. Disconnect the SkinVivid from
the mains supply.
The rechargeable battery can now be operated for 40 minutes.
6.

Preparation

1. Before using the SkinVivid, clean your face and the parts of your
skin you intend to treat with your usual cleaning products.
2. If necessary, groom your face and the parts of your skin you
intend to treat with the usual care lotions and moisture creams.
3. If you would like these skin care products to absorb faster, use
the hot mode with sonic vibration after applying the cream
(see chapter "Using the hot massage" and "Operation").
16
6
of the SkinVivid.
4
.
3
is illuminated in red during the charg-
5
.