Introduction; Device Description; Installation; Rigging - Evolite 2R MkII Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 Introduction
Thank you for selecting this professional fixture from evolite
This new intelligent Moving Beam will provide you reliability, latest features, and professional lighting effects for a long period of
time.
This evolite fixture is complying with European standards: EN60598-1:2008+A11:2009 EN60598-2-17:1989+A2:1991 et RoHs.

Device description

Features
> Fit with 2R lamp
> 15 or 19 DMX channels
> Static gobo wheel comes 14 gobos with blank
> Color wheel comes 14 colors with white
> Strobe effect with 1-10 flashes per second
> Color change with rainbow effect, Gobo shaking effect
> Frost effect, Pan/Tilt fine, lamp on/off via DMX control
> Prism rotation and effect movement
> DMX-controlled operation or stand-alone operation with Master/Slave function
> Sound-controlled via built-in microphone
> Addressing via LCD control panel
 Installation
o Rigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any
harming deformation.
IMPORTANT!OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working load limits, installation material
being used, and periodic safety inspection of all installation material and the projector. If you lack these qualifications, do not attempt
the installation yourself, but instead use a professional structural rigger. Improper installation can result in bodily injury and or damage
to property. The projector had to be installed out of the reach of people
Always secure your fixture with a safety cable !
MOVING BEAM 2R MkII Manual Ver. 1.00
Page 14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Moving beam 2r mkiiMoving beam 2r

Table des Matières