Technical Specifications; Product Description; Buttons - Fermax Veo Duox Manuel D'installation

TECHNICAL SPECIFICATIONS

Power supply (without polarity)
Consumption
- on standby: 35 mA
- maximum: 230 mA.
Number of terminals per dwelling
Address of each monitor: 6 digits
Operating temperature
Humidity
Screen OSD TFT 4.3
Resolution
Monitor dimensions:

PRODUCT DESCRIPTION

VEO Monitor:

BUTTONS

Button for lock release / calls to the concierge.
• When you are in communication with the Outdoor Panel (audio only or
video only or audio+video), pressing this button activates the lock release.
• With the arm hanging up (monitor idle), pressing this button makes a call
to the concierge (if there is a concierge and the monitor is in Day Mode or
Mixed Mode).
Auto-On button.
Connection via block camera or General Entrance camera (feature available
depending on the type of installation,
Auxiliary Function F1.
F1
Auxiliary Function (negative output "-" / command transmission).
ing modes of the F1 button and the F1 terminal are adjustable. You can select
between the following modes:
• Negative transmission: Negative output is emitted by terminal F1 when the
F1 button is pressed, which also sends an F1 activation command in order
to activate an auxiliary device.
• Panic Call to Concierge: Command transmission (if present).
Note: It is initially confi gured by default as an output, and sends a negative "-".
"
200 x 200 x 46mm - 8" x 8" x 1.8" - (Height x Width x Depth)
F1
Buttons
LED
see Chapter Operation:
18 Vdc
3
000001...999999
[-5, +40 °C] / [23, 104 °F]
[0% - 90%]
Horizontal: 480 Line
TV
Vertical: 272 Line TV
Auto-on).
The operat-
DUOX VEO MONITOR
7