Noise Information; Additional Safety And Working Instructions - Milwaukee HDE 13 RQD Notice Originale

TECHNICAL DATA
Rotary Drill
Production code
Rated input
Output
No-load speed
Speed under load max.
Drilling capacity in steel
Drilling capacity in wood
Drilling capacity in Aluminium
Drill chuck range
Drive shank
Weight according EPTA-Procedure 01/2003

Noise information

Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Connect only to a single-phase AC current supply and only to the mains voltage specified on the
rating plate. Must only be used from sockets with earth wire.:
Vibration emission value a
h,D
Uncertainty K==
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
DRILL SAFETY WARNINGS
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Fasteners contacting a
"live" wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.

Additional Safety and Working Instructions

Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is re-
commended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thorough-
ly, e.g. with a vacuum cleaner.
Do not machine any materials that present a danger to health (e.g.
asbestos).
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
Clamp your workpiece with a clamping device. Unclamped
workpieces can cause severe injury and damage.
Switch the device off immediately if the insertion tool stalls! Do
not switch the device on again while the insertion tool is stalled,
as doing so could trigger a sudden recoil with a high reactive force.
Determine why the insertion tool stalled and rectify this, paying
heed to the safety instructions.
HDE 13 RQD
3844 94 03...
... 000001-999999
825 W
410 W
0-500 min
-1
2,6 min
-1
13 mm
38 mm
20 mm
1,5 - 13 mm
1/2" x 20
3,2 kg
86 dB (A)
97 dB (A)
1,0 m/s
2
1,5 m/s
2
English
English
9 9
GB
GB