D) The subarea function enforces the robot mower to mow from one subarea to another, but it doesn't mean
the robot mower always mow within the subarea, there is possibility that it will go to the other two.
E)Under subarea function, when battery is low and robot mower go back to charging station automatically,
after charging finished, the mower will continue mowing by itself from where it stopped. But if robot mower
stopped for mechanical problem, after fully charged, the mower will not go out mowing according to the setting,
it will start mowing the second day from area one to area three.
(2) Programming Appointment
Move the mower back to charging station, put the mower on the fence line and facing the charging
station. Input password to start the mower, press "MENU" to enter "SETTINGS" page, press "↓" to
select " Set an appointment ", then press "OK" to enter "APPOINTMENT" page, press "↓" to
select "Work hours", then press "OK".
Enter "Work hours" page, set start time, working time for each area separately, press "OK"
Notice:
1) Max working time for single area or total 3 subareas are no more than 255 minutes.
2) Programming appointment and Subarea just work on automatic working mode.
3) If press the start button to start the mower, the subarea appointment is invalid.
to confirm. And then press
return to the homepage.