Elem Garden Technic RO24V32 Traduction Des Instructions D'origine page 53

Operation:
RO24V32
1．Power On:
Place the mower inside of the fence line area. Insert the key and start the power. Press the remote Power button
） and then press Auto button. Then Press Manual button, move the mower near the fence line and
（
the mower clockwise direction to the charge station. Then press Auto button. The mower drives to the
charging station along the fence line. When the extruding poles contact with the paddles, it will retreat to the
lawn automatically for mowing operation in auto pattern.
2．The mower can be controlled by remote in the following way:
a) Place the mower on the fence line in clockwise direction.
Turn on the power key. When a buzzing sound is heard,
press the remote with
The mower starts to work in auto pattern.
b) Press Charge button to command the mower back to the
charging station for charging. When it is fully charged, pressbutton and then
Auto button, the mower will continue back
to lawn to work in auto pattern.
c) When working in auto pattern, press Manual button to change
to manual pattern. Press F button for forward, B button for
backward, L button for left and R button for right. Press Knives
button for on/off of blades. When working in manual pattern,
press Autot buton to change back to auto pattern.
d) Press button for pause. To restart the auto pattern, press
button first and then Auto button.
e) When we go into the manual model, please press Cutting Model.
The mower goes into spiral working mode. F and B button make
The mower goes ahead or goes back. L or R make the mower go left or right.
Note:
The direction buttons and Knives button can only be applied when in manual pattern.
When go back to the charging station automatically or manually in manual pattern, F button and B button is
void. But R button and L button are still valid.
The remote is not available when the mower drives on or within 20cm near from the fence line.
Please remove the remote battery if the remote is not used for a long time.
There is no function for button "-2.5H" in the remote.
button and then press Auto button.