Outdoor Use; Cleaning And Maintenance - HQ Power HQPE10006 Mode D'emploi

5. Operation
5.1 Indoor Use
1. Place the projector onto the
stand base [1] and turn
clockwise until locked.
2. Connect the 2-pin plug of the
power cord to the adaptor
inlet insuring proper polarity.
To avoid water getting in,
make sure to turn the plug
cap clockwise until secure.
3. Connect the power adapter
to the mains.
4. Adjust the angle of the
projector as desired [2].

5.2 Outdoor Use

1. Place the projector onto the
stand base [1] and turn
clockwise until locked.
2. Connect the 2-pin plug of the
power cord to the adaptor
inlet insuring proper polarity.
To avoid water getting in,
make sure to turn the plug
cap clockwise until secure.
3. Connect the power adapter
to the mains.
4. Adjust the angle of the
projector as desired [2].

6. Cleaning and Maintenance

Occasionally wipe with a damp cloth to keep it looking new. Do not use
harsh chemicals, cleaning solvents or strong detergents.
V. 01 – 11/09/2017
HQPE10006
4 ©Velleman nv