Seca 808 Mode D'emploi Et Garantie page 16

FEMALE NORMAL: female, normal
build, (exercising a maximum of twice a
week for 30 minutes),
MALE ATHLETIC: male and athletic,
FEMALE ATHLETIC:
athletic.
– Confirm your selection by briefly press-
ing the SET key.
Measuring with automatic person recognition
The seca 808 can use the weight to recognise whether the person standing on the scale
matches one of the stored sets of data in the four people memories. So it is not always
necessary to bend down to switch on the scale using one of the keys. To do this, the
measured weight is compared with the stored weights and, if it is within a certain toler-
ance, it is then linked to the appropriate personal memory. The current weight is then
stored again and used as the basis for subsequent measurements. As a result, the scale
is always updated if you lose weight continuously - while on a diet, for example.
Note:
When you get on the scale the first time after storing your personal data, you must first
switch on the scale using the key assigned to your data. The scale can then assign your
weight to your personal data.
– Step gently onto the scale. The vibra-
tion switch starts the scale.
, and
se(a 8. 8 . 8 . 8 . 8 .
utively in the display. The scale is then
automatically set to zero and ready to
use.
– Step onto the scale barefoot and stand
still (see Fig. 6)
The scale measures your weight and
subsequently starts measuring the elec-
trical resistance of your body tissue.
While the measurement is being taken,
the symbol moves across the display.
o
– After measurement, the scale com-
pares the measured weight with the
Note:
If your determined weight is close to the stored weight of another person, it could be the
case that your measured values are assigned to a different personal memory. Check
whether the correct personal memory symbol is being displayed during the measurement.
If necessary, switch on the scale using the MENU, L, M or SET key assigned to your
personal memory before measuring if automatic person recognition does not work.
Model 808
female and
appear consec-
0. 0
The menu for entering age appears.
– You can increase or decrease the value
using arrow keys L and M.
– Once the correct value has been set,
briefly press the SET key.
This concludes data entry for the per-
sonal data for one person.
stored weights. If it cannot clearly as-
sign it, all personal memory symbols for
which the weights stored are close to
the measured weight flash on the dis-
play.
– If the scale cannot clearly assign your
weight, now press the key (MENU, L,
M or SET) which is assigned to your
personal data.
– Following successful measurement,
the values for BMI, body fat and body
water are displayed three times con-
secutively. The scale then switches off.
– Compare your values with the catego-
ries on pages 14 and 15.
GB
13