Silverline Comfort Heater 1200 WALL IPX4 Mode D'emploi page 9

EN
Where should Comfort Heater 1200 Wall IPX4
Heater correctly, as incorrect positioning may result in a fire risk.
Please bear in mind the following distances:
For wall mounting: Distance from ceiling 15 cm
For ceiling mounting: Distance from wall 30 cm
Distance to floor: 180 cm
The short side of the heater must be at least 15 cm away from any other objects.
Never direct the Comfort Heater towards a wall or ceiling. Nor should the Comfort Heater be installed over a door
opening on the side where the door opens under the heater.
How do you use Comfort Heater 1200 Wall IPX4
turn it on using the switch on the wall bracket by pulling the cord. An indicator on the wall bracket shows which
setting the heater is on. Select power setting "I" 600 W or "II" 1200 W. Setting "0" means the heater is off.
How large an area does Comfort Heater 1200 Wall IPX4
around 10 m .
2
Where can you use Comfort Heater 1200 Wall IPX4
veranda. Also indoors, for heating the place where you are instead of heating the whole house.
Does it take a long time for Comfort Heater 1200 Wall IPX4
starts as soon as it is switched on.
Can Comfort Heater 1200 Wall IPX4
Heater can cope with being outside in drizzle and still function safely without any problem.
Does Comfort Heater 1200 Wall IPX4
at the 1200 W setting for one hour, it only consumes 1.2 kWh. At setting 600 W only 0.6 kWh.
How long does the carbon-fibre rod last? Around 3,000 hours.
How long does the guarantee last? 2 years.
Ceiling mounting bracket
1
-
Silverline C-Wave
® ™
Warms your skin and is gentle
and healthy. It stimulates blood
circulation in the muscles,
and at the same time avoids
drying out the skin.
Optimal area coverage - Two
power settings 600 W and 1200 W
provide optimised area coverage
and energy consumption.
™
be positioned? It is very important to position the Comfort
™
? Connect the Comfort Heater to an earthed wall socket and
™
? Outdoors on the patio, on the balcony or on the
™
withstand rain? Yes. Protection class IPX4 means that the Comfort
™
consume a lot of energy? If you have the Comfort Heater switched on
2
- A gentle heat can be
Quick Start
™
felt immediately.
IPX4 – Rain-proof technology
for outdoor use.
Comfort Heating system
™
cover? The Comfort Heater covers an area of
™ to start generating heat? The radiant heat
3
Energy efficient - Heating rod and
reflector with unique properties. 98%
of the energy consumed is converted
Safe to use - Increased safety from
a heat-protective surface that does
not get hot enough to burn. Safety
certification in accordance with
current CE, GS, RoHS and IPX4
®
to effective heat radiation.
standards.