Opening The Sunshade Castello ® K4; Closing The Sunshade Castello ® K4 - Glatz CASTELLO M4 Notice De Montage

5.3 Opening the sunshade CASTELLO
• Remove the binding belt.
• Pre-spread the shade by pushing the roof struts and the cloth outwards
slightly (1).
• Go close to the mast and push the hand crank into the gear until it
reaches the stop position (2).
• Rotate clockwise (3) until the sunshade is extended.
• Take out the hand crank if necessary. The gear lock keeps the sunshade
extended.
(For sunshades with light, heating and/or a motor, please refer to the
applicable fitting and operating instructions.)
5.4 Closing the sunshade CASTELLO
• Turn crank anticlockwise (4) until the shade is closed.
• Fold the shade together completely by pushing the roof struts close
to the mast (5).
• Wrap the cloth around the shade and secure with the binding belt.
• If wanted, pull over the protective cover and tie it.
• If the wind freshens up, close the sunshade.
• Unsupervised sunshades must not be left open.
K4
®
K4
®
Fig. 4
5
1
2
EN
|
15
Fig. 5
4
3