Before Using The Appliance For The First Time; Operating The Appliance; Baking - CONSTRUCTA CH150250 Mode D'emploi

Accessories
Enamelled universal pan
Flat wire rack
Stepped wire rack with cut-out
System steamer
CLOU 2x telescopic railings retrofit kit

Before using the appliance for the first time

Clean your appliance before using it for the first time.
Remove accessories and any remaining packaging from the
1.
cooking compartment.
Clean the accessories and cooking compartment with hot
2.
soapy water (see section: Cleaning and care).

Operating the appliance

In this section, you will find out how to switch your appliance on
and off, and how to select an operating mode and temperature.
Switching on the appliance
Turn the operating mode selector until the desired operating
1.
mode is selected.
Turn the temperature selector until the desired temperature is
2.
selected.
The r indicator lamp lights up while the appliance is heating
up and during any subsequent heating.
Switching off the appliance
Turn the operating mode selector back to the Û position.
1.
Turn the temperature selector back to the Ú position.
2.
Open the appliance door carefully and remove the cooked
3.
food.
Note: To prevent moisture from forming on the control panel,
do not leave the cooked food in the appliance after it has been
switched off.
Saving energy
If you wish to switch off the appliance before the end of the
cooking time to save energy:
Turn the temperature selector back to the Ú position before
1.
the end of the cooking time.
Turn the operating mode selector back to the Û position
2.
when the cooked food is taken out of the appliance.

Baking

Do not use shelf height 2 when baking with the 3 Hot air
operating mode. The air circulation would be impaired and this
will have a negative effect on your baking.
Baking accessories
Baking tins
Use dark-coloured metal baking tins. Tinplate and glass dishes
increase the baking time required and the cake will not brown
42
Order no. Accessories
CZ 1242 X0 CLOU 3x telescopic railings retrofit kit
CZ 1442 X0 CLOU 4x telescopic railings retrofit kit
CZ 1432 X0 Protective device for oven door
CZ 1282 X0
The baking tray and universal pan may become distorted if
CZ 1702 X0
subjected to significant temperature differences (e.g. with
frozen foods in the hot cooking compartment).
Heat with % Top/bottom heat at 240°C for 30 minutes.
3.
Afterwards, wipe the cooled cooking compartment with hot,
4.
soapy water.
Clean the outside of the appliance with a soft, damp cloth
5.
and soapy water.
Switching the gas hob on and off
Your gas hob comes with its own instructions for use. Please
read all the safety notes given there before using the gas hob.
Switching the gas hob on
You can set the heat setting for the individual hotplates using
the four hotplate control knobs.
Caution!
In order not to damage the control knobs, do not turn them
past the stop after the œ low flame.
Setting
Ú
8
›
œ
Turn the control knob slowly past the 8 ignition position to ›
1.
high flame.
The appliance will ignite automatically.
Set the flame to the desired size between › high flame and œ
2.
economy flame.
Switching the gas hob off
Turn the control knob clockwise as far as the stop to Ú.
evenly. If you wish to bake using tinplate tins and % Top/
bottom heat, you should use shelf height 1.
Always place a loaf tin diagonally and a round baking tin in the
centre of the wire rack.
Order no.
CZ 1742 X0
CZ 1752 X0
440651
Meaning
The hotplate is turned off
Ignition position
High flame, highest power
Economy flame, low power