First Time Use - V-ZUG Variofresh 60i eco Mode D'emploi

Masquer les pouces Voir aussi pour Variofresh 60i eco:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FIRST-TIME USE
Connect the appliance to a mains power source.
On electronic models, this may cause a signal tone to sound, indicating that the temperature alarm has
been triggered. Press the warning tone shutoff switch. If present, place the antibacterial odor filter in the
fan as illustrated on the filter packaging.
Note: After switching on the appliance, you must wait for 4-5 hours until the correct storage temperature
has been reached for an appliance filled normally.
MAINTENANCE AND CLEANING OF THE
APPLIANCE
Clean the appliance occasionally with a cloth and a solution of hot
water and a neutral cleaning agent specifically intended for the cleaning
of refrigerator interiors. Do not use any abrasive items or substances.
Using the tool provided (see Fig.), clean drain aperture in back panel
of refrigerator near the fruit and vegetable tray on a regular basis to
assure continuous and correct condensate draining.
Before maintenance and repair work, always disconnect the mains plug
on the appliance or isolate the mains power supply.
Caution: Refrigerator accessories must not be rinsed in the dishwasher.
REPLACING LEDS
If the product is equipped with LED lamps as shown,
contact the Technical Customer Service whenever these
need to be replaced.
LEDs last longer than conventional bulbs, improve
visibility inside the appliance and are environment-
friendly.
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Perfect 60iPerfect 60i eco510595105751058

Table des Matières