Technical Specifications - BoomToneDJ Motion Beam Bar Mode D'emploi

Button:
1. MENU
2. UP
3. DOWN
4. ENTER
Note:(1) In about 10 seconds, if no buttons were pressed, the LED display will be off.
Press any button to turn the display on again.
(2) After pressing a button, all the parameters will be saved after about 2
seconds.
(3) No matter what the program in which mode, once to detect the DMX or
SLAVE signal, the program will jump into DMX or SLAVE mode automatically.
Then, if DMX/SLAVE signal was disconnected, the program will return to the
original mode.

3- Technical Specifications

●
6, 16, 28, 32
● 3 Operational Modes: DMX, Master/Slave, auto, sound activated
● Light Source: 6 x 12W RGBW 4 in 1
● Power supply: 100 - 240Vac (50-60Hz)
● Power consumption: 108W
● Size: 1030 x 200x250 mm
● Weight: 12.5 kg
This BoomToneDJ fixture is complying with European standards: EN 2014/30/EU,
EN 2011/65/EU, EN 2014/35/EU.
To select the program function
Increase parameter
Reduce parameter
Enter submenu
DMX channels
13