Changing The Battery; Maintenance; Technical Data; General Conformity Declaration - Selve i-R Multi Send Notice D'utilisation

Changing the battery/Technical Data
GB

Changing the battery

Maintenance

Clean the device with a damp cloth only. Do not use a cleansing agent
since this could damage the plastic.

Technical data

Nominal voltage:
Battery type:
System of protection:
Permissible
ambient temperature:
Radio frequency:
The maximum radio range is up to 25 m indoors and up to 350 m in
the open.
Subject to technical modifications.

General conformity declaration

The company SELVE GmbH & CO. KG, hereby declares that the
i-R Multi Send/i-R Multi Send Plus is in conformity with the basic re-
quirements and other relevant provisions of the Directive 1999/5/EC.
The declaration of conformity can be seen at www.selve.de.
1. Open the battery compartment
(remove the cover by pulling it down-
wards).
2. Take out the batteries.
3. Insert the new batteries in the correct
position.
Batteries don't belong into the
domestic garbage.
Please take the batteries used up
to your local gathering point.
3 V DC
LR 03 (AAA)
IP 20
-10 to +55 °C
868,3 MHz
60