Playing Two Mds Continuously (Relay Play) - Sony MDS-W1 Mode D'emploi

Playing Two MDs Continuously
(Relay Play)
You can have the deck play two MDs in succession
from deck A to deck B in any play mode.
RELAY
§
EJECT
≠ ±
AMS
0 ) r
·
P p
·
1
Insert MDs into both decks.
2
Press RELAY.
The RELAY indicator turns on.
3
Select the play mode you want according to the
table below.
To play in
Normal play (page 13)
Shuffle Play (page 28)
Program Play (page 29)
When "REP" or "REP 1" appears in the display,
select "OFF" in SET UP menu "REPEAT" or press
REPEAT on the remote until "REP" or "REP 1"
disappears (see pages 26 and 27).
4
Press · on deck A to start playing.
When playback on deck A finishes, playback on
deck B (which is currently stopped) begins
automatically.
To stop Relay Play
Press p on the deck which is playing.
To cancel Relay Play
Press RELAY to turn off the RELAY indicator.
§
EJECT
≠ ±
AMS
0 ) r
·
P p
Select in SET UP menu
"PLAY MODE"
(or press on the remote)
CONTINUE
SHUFFLE
PROGRAM
Notes
• You cannot do Relay Play while deck B is playing,
recording or editing.
• If you change the pitch during Relay Play, the pitch
changes in the same manner for both deck A and deck B.
The pitch setting returns to the initial value (0%) when
you turn the deck off or eject the MDs from both deck A
and deck B.
• While the RELAY indicator is on, the play mode changes
in the same manner for both deck A and deck B.
• If you set either deck to "REPEAT ALL" during Relay
Play, playback repeats continuously in the order of
deck A n deck B n deck A n deck B n deck A ....
Playing MDs
31
EN