Status Indications; Cleaning And Caring For The Inverter - Dometic SINEPOWER DSP 212 Instructions De Montage Et De Service

Cleaning and caring for the inverter

Charging the device via the USB port
I
NOTE
Also observe the operating manual of the device you want to charge via
the USB port.
➤ Connect the device to the USB port as shown (fig. 9, page 7).
8.2

Status indications

The blue LED (fig. 2 2, page 3) shows the operating condition of the inverter.
Display
Constantly lit
Long flash, short interruption
Quick flash
Off
9 Cleaning and caring for the inverter
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
18
Input voltage
Normal mode
Inverter overheated/Overload
Overvoltage/Undervoltage
Other fault
SinePower
EN