SpeedEPart Agri-Fab 45-0543 Mode D'emploi page 7

• On the left side, insert a 5/16" x 3-1/2" hex bolt (14)
through the upper hole on the transport tube (10), a
spacer (42), and the hitch tube. Secure with a 5/16
nylock nut (27). Do not tighten yet. See figure 4.
14
10
FIGURE 4
• Fasten the hitch tubes together using two 1/4" x 2-3/4"
hex bolts (15), hitch brackets (46), and 1/4" nylock hex
nuts (26). Do not tighten yet. See figure 5.
• Install the hitch pin (21) through the hitch brackets
(46), and secure with a 3/32 hair cotter pin (25).
FIGURE 5
27
42
15
15
21
46
46
26
26
25
• Assemble a 1/2" x 4" hex bolt (13), a .531 washer (34),
a wheel (6), a .531 washer (34), and a .5" jam nut (29).
Finger tighten only.
• Attach the wheel assembly to the transport tube using
a 1/2" nylock jam nut (28). Repeat for the other side. See
figure 6.
6
13
34
FIGURE 6
7
34
28
29