Read This First; Safety Precautions - SKF TKRS 11 Mode D'emploi

READ THIS FIRST

Safety precautions

Read this instruction for use fully. Follow all safety precautions to avoid
personal injury or property damage during equipment operation.
SKF cannot be responsible for damage or injury resulting from unsafe
product use, lack of maintenance or incorrect equipment operation. In case
of any uncertainties as regards the use of the equipment contact SKF.
This device is used for inspecting the movement of rotating and vibrating
objects. It may only be used in accordance with these instructions.
The device must not be opened. Modiications to the device are not
permitted. The manufacturer shall not be liable for damage resulting from
incorrect use or use contrary to the intended use. Warranty claims will also
be invalidated in this event.
W A R N I N G :
Risk of injury!
• Moving objects appear still or in slow motion in stroboscopic light.
• Do not touch such objects under any circumstance.
• The device may not be used in potentially explosive areas.
• Stroboscopic light can trigger epileptic seizures in persons at risk.
• Never direct the LED beam at people or animals and do not stare directly
at the beam.
C A U T I O N :
Flashing lights can cause retina damage!
• The SKF Stroboscope TKRS 11 is itted with 3 LEDs.
These produce potentially dangerous optical radiation, which can cause
retina damage. Do not stare directly at the light and never direct it at
people or animals.
EN 3