Technical Data; Specified Conditions Of Use - Güde GBTS 1100 Traduction Du Mode D'emploi D'origine

ENGLISH
24

Technical Data

Belt- and disc sander
Art. No
Rated voltage
Rated frequency
Rated input
No-load speed
Degree of protection
Belt speed
Belt size
Sanding surface max.
Velcro sanding disc
Dimensions L x W x H
Weight
Noise details
Sound pressure level L
Sound power level L
Measured according to EN61029; Uncertainty K = 3 dB (A)
Wear ear protectors!
The declared vibration total value(s) and the declared noise emission value(s) have been measured in ac-
cordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value(s) and the declared noise emission value(s) may also be used in a prelimina-
ry assessment of exposure.
The vibration and noise emissions during actual use of the power tool can differ from the declared values
depending on the ways in which the tool is used especially what kind of workpiece is processed.
Identify safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is swit-
ched off and when it is running idle in addition to the trigger time).
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
pA
WA
Read and understand the operating
instructions before using the
appliance. Familiarise with the

Specified Conditions Of Use

This equipment is exclusively intended for surface
processing and deburring wood or wood-like materi-
als, as well as ferrous metals and non-ferrous metals,
while taking the maximum sanding surface and
safety regulations into consideration.
The machine may only be used in a technically
perfect condition and taking into account all safety
information.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
GBTS 1100
38352
230 V
~ 50 Hz
1100 W
1500 min
-1
IP X0
5,8 m/s
1219 x 152 mm
375 x 152 mm/
Ø 230 mm
665 x 450 x 455 mm
40 kg
75,6 dB (A)
78,4 dB (A)