Time Setting - EQUATION YAA02E-9HC Notice De Montage - Utilisation - Entretien

FR
3. HOW TO USE
ES
LCD Screen:
PT
EL
PL
RO
EN
(1) Clock,
(2) Date,
(3) Heating,
(4) Buttons lock
(5) M for manual,
(6) P for Program (LCD screen is off during non programmed hours)
(7) Heating status in each hour
(8) Power setting(only in manual mode)
(9) Centigrade
(10) Target temperature
How to use:
Plug and switch on the unit.
Press , when the LCD is bright, all the part could get started to set.
For the first time using, set the time firstly.

Time setting:

Press for 3 senconds to set the clock, the hour starts to twinkle like following
picture
82
3. HOW TO USE
Set the hour with / , select hour from 0~23.
Press again, the minute start to twinkle like following picture
Set the minute with / , select minute from 0~59.
Press again, the date start to twinkle like following picture
Set the date with / , select date from 1~7.
1-Monday, 2-Tuesday, 3-Wednesday, 4-Thursday, 5-Friday, 6-Saturday, 7-Sunday
Note: If press or without releasing, you can achieve rapid increasing or
decreasing;
If there is no pressing, the twinkle would stop 10 and setting will be finished
automatically.
Temperature setting (in manual and program mode)
Press / to set the target temperature from 5-35 degrees.
Daily heating status setting
When in program mode, press to set the program, 12345 appears on the screen,
the block starts to twinkle like following picture
83
FR
ES
PT
EL
PL
RO
EN