PNI HOUSE PTZ1300 Manuel Utilisateur page 5

Connections
1 Video inputs
2 Audio output Connect an audio amplifier
3 Video output Connect a monitor (composite video)
4 HDMI
5 VGA
6 Audio inputs
7 2 x USB
8 Ethernet port
9 RS485
10 Power source Insert the 230V - 12V / 2A power adapter
Instructions for use
Installing the storage unit
Before first use, please install the storage unit. A single SATA HDD with a
maximum capacity of 14TB can be installed inside the recording unit (the
HDD is not included in the package) .
• Loosen the screws and remove the NVR cover
• Connect the data cables and secure the hard drive to the screws
• Replace the NVR cover
• Connect the power and internet cable to the NVR
3
1 2
Connect the 4 cameras included in the package
Connect a monitor via an HDMI cable (max. 1080P)
Connect a monitor via a VGA cable (max. 1080P)
Connect a microphone to each RCA port
Insert a USB mouse or USB flash drive for firmware
update or backup
Insert an Ethernet cable to connect the NVR to the
router
Serial interface
5
5
4 6
8
7 9 10
User manual