Turn The Device On - PNI HOUSE PTZ1300 Manuel Utilisateur

Turn the device on

Plug the power cord into a 230V outlet. The NVR will start. The indicator LED
will light up. By default, 16 channels will be displayed on the screen.
If the start time is within the preset program for recording, then the recording
function will start automatically.
Notes:
1. Check that the input voltage corresponds to the recommended voltage of the
device. The supply voltage is 230V ± 10% / 50 Hz 2A.
2. We suggest using a UPS device to protect the device from voltage variations.
Turn the device off
There are two ways to turn off the device.
1. Access the main menu (right click on the screen) and select the option
Logout - Shutdown
2. Turn off the power supply.
System authentication
After turning on the device, log in to the system.
By default, the admin user is protected by password 1234. If the password is
entered incorrectly 5 times in a row, the account will be blocked. By restarting
the device or after half an hour, the account will be unlocked automatically .
Note: For the security of your system, please change the password after the first
login.
Quick setup guide
After starting the device, the quick setup guide will start.
Note: We recommend configuring the system before installing the NVR and
cameras in the final location.
User manual 6