Table des Matières
Publicité
ELM 32/1000 EASY
lations may restrict the age of the operator. When
not in use store the machine out of reach of chil-
dren.
This machine is not intended for use by persons
f
(including children) with reduced physical, senso-
ry or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the machine
by a person responsible for their safety. Children
should be supervised to ensure that they do not
play with the machine.
Never mow while people, especially children, or
f
pets are nearby.
The operator or user is responsible for accidents
f
or hazards occurring to other people or their
property.
Do not operate the machine when barefoot or
f
wearing open sandals, always wear substantial
footwear and long trousers.
Thoroughly inspect the area where the machine
f
is to be used and remove all stones, sticks, wires,
bones and other foreign objects.
Before using, always visually inspect to see that
f
the blades, blade bolts and cutter assembly are
not worn or damaged. Replace worn or damaged
blades and bolts in sets to preserve balance.
Mow only in daylight or in good artificial light.
f
Avoid mowing in bad weather conditions especial-
f
ly when there is a risk of lightning.
Avoid operating the machine in wet grass, where
f
feasible.
Walk, never run.
f
Never operate the appliance with defective
f
guards or shields, or without safety devices, for
example deflectors and/or grass catchers in place.
Always wear ear protection.
f
Working on banks can be dangerous.
f
Do not mow on excessively steep slopes.
ƒ
Always be sure of your footing on slopes or wet
ƒ
grass.
Mow across the face of slopes - never up and
ƒ
down.
Exercise extreme caution when changing direc-
ƒ
tion on slopes.
Use extreme caution when stepping back or pull-
f
ing the machine towards you.
Never mow by pulling the mower towards you.
f
Stop the blades if the machine has to be tilted for
f
transportation when crossing surfaces other than
grass and when transporting the machine to and
from the area to be mowed.
Do not tilt the machine when starting or switch-
f
ing on the motor, except if the machine has to be
tilted for starting in long grass. In this case, do not
tilt it more than absolutely necessary and tilt only
the part which is away from the operator. Always
ensure that both hands are in the operating posi-
tion before returning the machine to the ground.
Switch on the motor according to the instructions
f
with feet well away from rotating parts.
Do not put hands or feet near or under rotating
f
parts.
Always stand clear of the discharge zone when op-
f
erating the machine.
Never pick up or carry the machine while the mo-
f
tor is running.
Do not modify this product. Unauthorized modifi-
f
cations may impair the safety of your product and
may result in increased noise and vibration.
Regularly inspect the supply cable and any exten-
f
sion cables. Do not connect damaged cables to
the supply or touch a damaged cable before it is
disconnected from the supply. A damaged cable
can lead to contact with live parts. Beware elec-
tric shock hazard.
REMOVE THE PLUG FROM THE SOCKET
Whenever you leave the machine.
f
Before clearing a blockage.
f
Before checking, cleaning or working on the ma-
f
chine.
After striking a foreign object. Inspect the ma-
f
chine for damage and make repairs as necessary.
If the machine starts to vibrate abnormally (check
f
immediately).
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the ma-
chine's rating plate are compatible with the power
supply you intend to connect it to.
This appliance is Class II* and is designed for connec-
tion to a power supply matching that detailed on the
rating label and compatible with the plug fitted. If
an extension lead is required, use an approved and
compatible lead rated for this appliance. Follow all
the instruction supplied with the extension lead.
*Double insulated: This product requires no
earth connection as supplementary insulation
is applied to the basic insulation to protect
against electric shock in the event of failure of
the basic insulation.
GUIDELINES FOR USING EXTENSION CORDS
Make sure your extension cord is in good condition.
f
When using an extension cord, be sure to use one
heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
Always replace a damaged extension cord or have
f
it repaired by a qualified person before using it.
Protect your extension cords from sharp objects,
f
excessive heat and damp/wet areas.
Use a separate electrical circuit for your tools. This
f
circuit should be protected with the appropriate
time-delayed fuse. Before connecting the motor to
the power line, make sure the switch is in the OFF
position and the electric voltage is rated the same
as the voltage stamped on the motor nameplate.
Running at a lower voltage will damage the motor.
PRODUCT SPECIFICATIONS
INTENDED USE
This lawn mower is intended for private residen-
tial use to cut grass in small lawns and gardens.
This lawn mower is not intended to cut grass in
public parks, playing fields, farms, or forests. Do
not use this lawn mower for any application other
than that for which it is intended.
English | 11
www.ffgroup-tools.com
Publicité
Table des Matières
