Product Specifications - F.F. Group GLM 48/174 SP PLUS Notice Originale

GLM 48/174 SP PLUS | GLM 53/174 SP PLUS
syndrome" or "white hand"), especially to people
suffering from circulation disorders. The symptoms
can regard the hands, wrists and fingers and are
shown through loss of sensitivity, torpor, itching,
pain and discoloring of or structural changes to the
skin. These effects can be worsened by low ambient
temperatures and/or by gripping the handgrips ex-
cessively tightly. If the symptoms occur, the length
of time the machine is used must be reduced and a
doctor consulted.
WORKING AREA HAZARDS
Thoroughly inspect the whole work area and use
a rake or yard brush to manually loosen debris and
remove anything that could be projected by the
machine, be a hazardous source (stones, branch-
es, iron wire, bones etc.), or cause damage to the
machines if run over. Check that there are no by-
standers or pets within at least 15 meters of the
machine's range of action.
Do not direct the silencer and therefore the ex-
haust fumes towards flammable materials.
Always check for any objects that may block the
air intake screen before beginning to work. A
clogged air intake reduces the machine's perfor-
mance and increases the engine's working tem-
perature, which can result in engine failure.
Do not operate the machine in a confined space
where dangerous carbon monoxide fumes can
develop. Don't operate the machine near open
windows.
Work only in daylight, or with good artificial light
in good visibility conditions.
Try not to cause any disturbance. Use this ma-
chine at reasonable times of the day only (not ear-
ly morning or late evening when the noise could
cause disturbance).
Take on a firm and well-balanced position. Where
possible, avoid working on wet, slippery ground or
in any case on uneven or steep ground that does
not guarantee stability for the operator. Protect
your feet by avoiding running when operating the
lawn mower. Mow across the faces of a slope (not
up and down) and avoid mulching on steep slopes.

PRODUCT SPECIFICATIONS

INTENDED USE
This machine was designed and manufactured for
cutting grass by mowing e.g. in lawns.
Any other use differing from the above-mentio-
ned ones could be hazardous, harm people and/or
damage things and the machine.
IMPROPER USE
The machine must not be used for mowing hazar-
dous materials, e.g. accumulation of inflammable
or explosive products, hot embers or combusti-
on material without a flame, lit cigarettes, glass,
sharp objects, metal objects, stones and any
other object that could be dangerous to the ma-
chine as well as the operator and others.
Examples of improper use may include, but are
not limited to:
Using the machine without the accessories speci-
f
fically supplied by the manufacturer for specific
uses, or use of accessories in a way not intended
in these instructions;
Use of the machine by more than one person.
f
TECHNICAL DATA
Article Number
Model
Cutting width cm
Propulsion
system
Cutting
mm
height range
Mulching
plug
Side
discharge
Engine model
Engine
cc
displacement
Engine rated kW /
power hp
Rated speed rpm
Fuel tank
L
capacity
Engine oil
L
capacity
Front wheel
mm
diameter
Rear wheel
mm
diameter
Grass bag
L
capacity
Weight kg
Sound power
dB
level
IDENTIFICATION
1. Clutch lever
2. Brake lever
3. Handle assembly and adjustment point
4. Rear discharge guard
5. Engine
6. Air filter assembly
7. Front carrying handle
8. Oil filler cap
9. Side discharge guard
10. Side discharge chute
11. Height adjustment lever
English |
46 200 46 201
GLM
GLM 53/174
48/174 SP
SP PLUS
PLUS
48 52,5
Self- Self-
propelled / propelled /
Single speed Single speed
25-75 25-75
Yes Yes
No Yes
RV175 RV175
174 174
3,2 / 4,3 3,2 / 4,3
2.800 2.800
1,5 1,5
0,5 0,5
177,8 203,2
254,0 279,4
65 65
31,1 31,7
96 98
www.ffgroup-tools.com
9