ATIKA LSH 2500 Notice Originale page 13

This may be caused by the following factors to be minded
before and during the use:
Proper use of the machine
−
− Proper condition of the machine for use
Handles and optional anti-vibration handles properly
−
mounted on the machine body
When you feel uncomfortable or notice discoloration of skin
on your hands during the use of the machine, stop working
immediately. Observe sufficient break times to rest. Failure
to have sufficient break times may result in a hand-arm
vibration syndrome.
The extent of exposure depending on the type of work or
machine use should be estimated and appropriate breaks
taken. In this way, the extent of exposure can be
considerably reduced over the entire work time. Minimise the
risk caused by vibrations. Maintain this machine according to
the instructions in the manual. If you intend to use this
machine frequently, contact your local authorised dealer and
purchase anti-vibration accessories if required. Avoid the use
of this machine at temperatures under 10°C. Create a work
schedule in order to minimise vibration exposure.
S a f e
S a f
When improperly handled a garden vac may be
dangerous. If electrical tools are used, the fundamental
safety precautions must be met to preclude the risks of
fire, electric shock and injuries to persons.
Before commissioning this product, read and keep to the
following advice. Also
regulations of your professional association and the
safety provisions applicable in the respective country, in
order to protect yourself and others from possible injury.
Pass the safety instructions on to all persons who work
with the machine.
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using it,
by reading and understanding the operating instructions.
Do not use the machine for unsuitable purposes (see
"Normal intended use" and "Working with the vacuum
cleaner").
Ensure that you have stand in a secure standing position
and maintain your balance at all times. Do not bend
forwards.
When working on slopes always make sure to have a
safe standing position.
Only operate the machine in walking speed, do not run
with it.
Be observant. Attend to what you do. Start working with
rationality. Do not use the device when you are tired or
under the influence of drugs, alcohol or medicaments.
One moment of carelessness when using the device can
result in serious injuries.
Wear suitable work clothes:
− Do not wear loose-fitting clothes or jewellery; they can
catch in moving parts.
Gloves and nonskid footwear
−
− Trousers to protect the legs
w o r k i n g
e w o r k i n g
observe the preventive
− Keep long hair away from the intake opening.
Otherwise, it could be drawn into the intake opening.
Wear a hairnet if required.
Wear protective clothing:
safety goggles
−
− Ear protection (Sound intensity level at workplace can
exceed 85 dB (A).
− It is recommended to wear a face guard to prevent
irritation due to dust.
Keep your workplace in an orderly condition! Untidiness
can result in accidents.
Be careful when stepping back! Risk of stumbling!
If you come across to foreign objects, please power off
the device and remove those foreign objects. However
before you restart the device, check it for possible
damages and have it repaired if necessary.
Take into consideration environmental influences:
− Do not use the device in moist or wet ambience.
Do not expose the device to rain.
−
− Do only work with sufficient visibility conditions.
Provide for good illumination.
Keep bystanders and animals away from your working
area.
Do not allow other persons, especially children, to touch
the tool or cable.
Switch off the machine if persons, in particular children or
pets, are close to you or if you change your working area.
Within his area of work the operator is responsible for
third parties.
Children and youngsters less than 16 years of age and
people who have not read the original instructions must
not operate the machine.
Keep children away form machine.
Never operate the machine if other persons are in the
immediate vicinity.
The user is responsible for accidents with other people or
their property.
Never leave the saw unattended.
Do not overload the machine! You work better and safer
in the given performance range.
Only operate the machine with complete and correctly
attached safety equipment and do not alter anything on
the machine that could impair the safety.
Faulty or damaged parts in the device must be replaced
immediately.
Never leave the machine powered when tipping it over on
its side. The machine is designed for operating in upright
posture.
Do not spray machine with water (this is hazardous due to
live components).
Switch the machine off and remove the mains plug from
the socket when
carrying out repair works
−
carrying out servicing and repair works
−
removal of faults
−
eliminating blockages
−
checking the leads to see whether these
−
are caught up or damaged
transporting
−
leaving unattended (even during short interruptions)
−
unusual noises and vibrations
−
12