Démontage Et Remontage; Dismanteling And Re-Assembly - TT electronics HMP Série Manuel D'installation Et Entretien

Table des Matières

Publicité

Un tel contrôle initial permet de simplifier et de
justifier les contrôles périodiques ultérieurs. Par
exemple, une machine nouvellement installée peut
être soumise à un contrôle hebdomadaire génÉ-
ral jusqu'à ce que l'expérience acquise permette
d'espacer les contrôles.
On profitera des arrêts, qu'ils soient ou non pré-
vus à l'avance, pour effectuer le nettoyage jugé
nécessaire,ainsi que pour un examen général.
VII. DÉMONTAGE ET REMONTAGE
Merci de nous contacter pour toutes nécessi-
tées du démontage et remontage des moteurs
HMP
NETTOYAGE DU FILTRE
FILTRE NON RÉGÉNÉRABLE
NETTOYAGE PAR SOUFFLAGE ÉNERGIQUE.
Le média filtrant (tissu de fibre synthétique) peut
être nettoyé 2 à 3 fois maximum (selon précautions
de nettoyage) après démontage de son support.Si
nécessaire l'élément filtrant peut être changé, sans
changer le support.
Frequent checking of these points serves to
simplify routine inspections. For example, a
weekly inspection of a newly installed machine
could be considered reasonable, and the period
could be lengthened as more experience is
gained.
When it is decided to take a machine out of
operation, or if a machine is stopped for other
reasons, it should be cleaned to the extent
necessary, and at the same time given a general
inspection.
VII. DISMANTELING AND RE-ASSEMBLY
Please contact our personnel for a step-by-step
assistance on dismantling and re-assembling
the HMP motors.
CLEANING OF THE FILTER
STANDARD FILTER
The filtering medium (with synthetic fiber fabric)
can be cleaned 2 or 3 times (according to precau-
tions of cleaning) after removal from its holder.
If necessary, the filtering element may be replaced
without replacing the holder.
15

Publicité

Table des Matières
loading

Table des Matières