11 AUX In mode
11.1
Operation
Your external player (e.g. mp3 player) must be connected to the auxiliary input jack
of sonoroSTREAM with an audio cable (with 3.5 mm connector, not supplied).
To access the AUX
In mode,
To start and
control playback,
To mute or restore
the sound output,
11.2
Setup menu
Press SETUP in the AUX In mode to access the setup menu (see chapter "Using the
menus"). The following options are available and the current settings (if applicable)
are marked with an asterisk (*).
[System Settings]
•
See chapter "System Settings".
[Main menu]
•
To access other playback modes, sleep timer or alarms.
© sonoro audio GmbH 2019
Press MENU once, then press
the navigation knob) to select the AUX In mode
and then press OK to confirm.
Perform all playback operations on the
external player.
Press
button.
◄
►
or
. (or rotate
GB
73