Factory Reset; Software Update; Setup Wizard; Info - Sonoro STREAM SO-410 Mode D'emploi

16.8

Factory Reset

This option clears all user-defined settings and replaces them with the
•
original default settings.
16.9

Software update

[Auto Check]
•
To set to periodically check for update.
[Check now]
•
To check for update immediately.
If a new software is available, sonoroSTREAM will ask if you want to proceed
with an update.
Before software upgrade, make sure that sonoroSTREAM is connected to a
stable power connection. Disconnecting power during a software update
may damage sonoroSTREAM.
16.10

Setup Wizard

To perform initial setup (see chapter "Performing initial setup").
•
16.11

Info

This shows the current software version, spotify version, radio ID and friendly
•
name.
16.12

Privacy police

Please visit the following page on a PC or mobile device.
•
www.frontiersmart.com/privacy
16.13

Backlight

[Dimmer level]
•
To select the brightness level of the display. Options include: [High], [Medium],
[Low] or [Auto].
If [Auto] is selected, the brightness level is automatically adjusted according to
the ambient light sensor at the front of sonoroSTREAM.
84 © sonoro audio GmbH 2019