Wolf ICBIM15/S Instructions D'installation page 8

INSTALLATION I N S T R U C T I O N S
INSTALLATION O P T I O N S
M U LT I P L E C O O K T O P I N S TA L L AT I O N
If the multi-function cooktop is to be used with
any combination of additional cooktop units or
modules with a filler strip, the cut-out width is
calculated by adding the corresponding units'
cut-out dimensions plus 32 mm for each addi-
tional unit. Refer to the illustration below.
IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, each
unit must have its own separate recommended
electrical circuit. When multiple gas cooktops
and/or modules are installed next to one
another, they can receive their gas supply from
a common line.
1518 mm
1511 mm
– 762 mm COOKTOP AND TWO MODULES OR
1276 mm
– 914 mm COOKTOP AND ONE MODULE
1130 mm
– THREE MODULES WIDTH OR
1124 mm
– 762 mm COOKTOP AND ONE MODULE
743 mm
TWO MODULES WIDTH
356 mm
489 mm
CUT-OUT
CUT-OUT
WIDTH
64 mm
DEPTH
min
FRONT OF COUNTERTOP
Countertop cut-out dimensions for installation of multiple cooktops
and/or modules
When two or more modules are installed
together, an integrated module filler strip
(IFILLER/S) is recommended. Contact your
Wolf dealer for information on these accessory
components.
IMPORTANT NOTE: Review specific
installation instructions for product to product
capabilities.
– FOUR MODULES WIDTH OR
A C C E S S O R I E S
Optional acces-
sories are available
through your
Wolf dealer.
9