CST/BERGER LM800 Série Notice Originale page 32

Rotating the Rotational Plane around the X- or
Y-axis
By pressing the direction or grade buttons "up" 34,
"down" 41, "rightwards" 36 and "leftwards" 44, you
can rotate the rotational plane around the X- or Y-axis.
For rotation around the X- or Y-axis in horizontal posi-
tion, the automatic levelling must be switched off first.
LM800DP: When the rotational laser level is in the
vertical position, rotating around the Y-axis is possible
at any time; for rotation around the X-axis, the auto-
matic levelling must be switched off first.
Maintenance and Service
Maintenance and Cleaning
Keep the remote control clean at all times.
Do not immerse the remote control into water or other
fluids.
Wipe off debris using a moist and soft cloth. Do not
use any cleaning agents or solvents.
If the remote control should fail despite the care taken
in manufacture and testing, repair should be carried
out by an authorised customer services agent for
Bosch power tools. Do not open the remote control
yourself.
In all correspondence and spare parts orders, please
always include the 10-digit article number given on
the type plate of the remote control.
After-sales Service and Customer
Assistance
For addresses, see "After-sales Service and Cus-
tomer Assistance", page 29.
Disposal
For disposal of the remote control, please observe the
information under "Disposal", page 29.
Subject to change without notice.
800.561.8187 information@itm.co
32 | English
2 610 A15 117 • 12.8.09
www. .com