Remote Control - CST/BERGER LM800 Série Notice Originale

Battery packs/batteries:
Ni-MH: Nickel metal hydride
Do not dispose of battery packs/batteries into house-
hold waste, fire or water. Battery packs/batteries
should be collected, recycled or disposed of in an
environmental-friendly manner.
Only for EC countries:
Defective or dead out battery packs/batteries must be
recycled according the guideline 91/157/EEC.
Safety Notes
Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Have the remote control repaired only
through a qualified repair person and only
using identical
This will ensure
the remote control is maintained.
Do not operate the remote control in explo-
sive atmospheres, such as in the presence of
flammable
Sparks can be created in the remote control which
may ignite the dust or fumes.
Read and strictly observe the safety warn-
ings in the operating instructions of the rota-
tional laser.
Functional Description
Intended Use
The remote control is intended for controlling
CST/berger rotational laser levels with infra-red
receivers, in indoor and outdoor use.
800.561.8187
30 | English

Remote control

replacement
that the functionality
liquids, gases or
www.
Battery packs/batteries no longer suitable for use can
be directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Subject to change without notice.
Product Features
The numbering of the product features refers to the
illustration of the remote control on the graphics page.
31 Outlet opening for infra-red beam
32 Remote control operation indicator
33 Standby button (Function not available for
LM800GR/LM800DP)
parts.
34 Grade "up" button on the remote control
of
35 Button on the remote control for line operation
and selection of line length (LM800DP)
36 Direction and grade button (rightwards) on the
remote control
dusts.
37 Button on the remote control for clockwise rota-
tion of the rotation head (LM800DP)
38 Battery lid latch of the remote control (on the
rear side)
39 Battery lid of the remote control (on the rear
side)
40 Serial number
41 Grade "down" button on the remote control
42 Button on the remote control for anticlockwise
rotation of the rotation head (LM800DP)
43 Button on the remote control for switching off the
automatic levelling
44 Direction and grade button (leftwards) on the
remote control
45 Button on the remote control for rotation opera-
tion and selection of rotational speed
(LM800DP)
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
.com
information@itm.co
2 610 A15 117 • 12.8.09