7.2.2 Single wall pipe and air intake in room
In this case the combustion air will be taken from
the room.
To achieve this:
• Remove the back panel of the stove (A)
• Disconnect the flexible combustion air hose (B)
at the top and bottom.
• Insert the aesthetic ring support (C) and the
ring (D) (supplied with and placed inside the
combustion chamber during transport).
• Connect the flue gas pipe (B) (Fig. 20)
B
C
A
58
7.2.3 Single wall pipe and outside air intake
In this case the combustion air is taken directly
from outside, from the back of the stove.
• Remove the back panel of the stove (A)
• Disconnect the flexible combustion air hose (B)
• Insert the aesthetic ring support (C) and the
E
D
B
Fig. 20
at the top and bottom.
ring (D) (supplied with and placed inside
the combustion chamber during transport)
(Fig. 21)
B
C
A
004778880 - 02/09/2021
D
B
Fig. 21