Control Applications Using A Keypad With Touch Screen - hager S761-22 Guide D'installation

Introduction
Control applications using
a keypad with touch screen
• ON/OFF: for controlling lighting or a 230 V electrical
device using your remote keypad. Each time you press
on the keypad you activate or deactivate the device or
lighting (no duration limit).
Activating
an electrical device
Press
on the
Light ON
or
Socket ON
key on the Light page
These keys can also be programmed for the toggle switch
function, in which case the same key is used to activate
or deactivate the appliance.
The appliance can also be activated or
deactivated using the remote-controlled
socket programming key.
G
B
This application is always active and can be used
together with other applications.
Deactivating
an electrical device
Press
on the
Light OFF
or
Socket OFF
key on the Light page
• Timer: control lighting or a 230 V device using your
remote keypad. The device or lighting will be automati-
cally switched off after the programmed duration.
Starting
the timer
Press Press again
on the on the
Light ON Light ON
or or
Socket ON Socket ON
key on the Light key on the Light
page, page,
programmed programmed
for Timer mode for Timer mode
The appliance can also be deactivated
using the remote-controlled socket pro-
gramming key.
This application can be used together with the
ON/OFF and Presence Simulation applications.
The timer duration is factory-programmed for 3
minutes. This duration can be changed (see chap-
ter on "Operating options").
90
Starting
Stopping
the timer
the timer again
Press
on the
Light OFF
or
Socket OFF
key on the Light
page