hager S761-22 Guide D'installation page 89

Introduction
The programming LED and key have two separate
functions:
Visual help with:
• programming
• configuration
For a period
of 5 minutes
Indicates state
after plugging
of remote-controlled
into the mains
device.
power outlet
• LED ON: activated
• LED OFF:
deactivated
Indicates state
5 minutes
of remote-controlled
after plugging
device.
into the mains • LED ON: activated
• LED OFF:
power outlet
deactivated
LED Key
Used for:
• programming
• configuration
Direct control
of device depending
on the chosen
application
Programming and configuration must be
performed with the device deactivated
(LED OFF). After the first 5 minutes, you must
deactivate the device, then disconnect and reconnect
the socket to put it in programming or configuration
mode again.
89
G
B