Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Introduction
Remote Control application
• Control a 230 V electrical appliance when away from home using a fixed
or mobile phone via the control panel with telephone dialler.
• Control a 230 V electrical appliance in Arm/Disarm mode when at home
using a keypad or remote control device via the control panel (on condi-
tion that the keys are programmed for the same remote control func-
tion).
2
3
1
6
4
5
7
8
9
0
Telephone
network
For this application and for local control, the remote-controlled socket cannot be operated using
a keypad with touch screen or using the keys programmed for Toggle Switch or Timer mode.
Command to be sent
Before you can use this application you need to configure your remote-controlled socket (see chapter on
"Operating options").
)
)
)
)
)
Activating an electrical device
• Light ON
• Relay 1 ON
3
1
2
• Relay 2 ON
4
5
6
7
8
9
0
• Relay 3 ON
• Relay 4 ON
• Light OFF
• Relay 1 OFF
• Relay 2 OFF
• Relay 3 OFF
• Relay 4 OFF
93
The control panel must
be programmed for
recognition by the remote-
controlled socket for this
application. To programme the
remote-controlled socket to be
operated by a different remote
control unit, the original control
panel programming must be
deleted as described in the
chapter on "Return to factory
configuration".
Deactivating an electrical device
G
B
Publicité
Chapitres
Table des Matières
