Agilent Technologies TwisTorr 304 FS AG Notice De Mode D'emploi page 248

17 Technical Information
Examples
302 R
320 Reserved to Agilent service
to 399
400 R
402 R
404 R
500 Reserved to Agilent service
503 R/W
504 R/W
1. Automatic means that when the controller stops, the vent valve is opened
NOTE
with a delay defined by window n. 126; when the controller starts, the vent
valve is immediately closed.
2. On command means that the vent valve is opened or closed by means of
window n. 122.
Figure 29
248/301
N Pump life in hours (zeroed by the reset
command)
A CRC EPROM (QE)
A CRC Param. (PA)
A CRC Parameter structure
N RS 485 address
L Serial type select
7 6
TOO HIGH LOAD
SHORT CIRCUIT
OVERVOLTAGE
Window N. 206 Bit Description
TwisTorr 304 FS AG Rack Controller User Manual / 87-901-029-01 (E)
5 4 3 2 1
PUMP OVERTEMP.
CONTROLL. OVERTEMP.
AUX FAIL POWER FAIL
0 to 999999
QE8XXXX (where "XXXX"
are variable)
PA8XXXX (where "XXXX"
are variable)
"XXXX"
0 to 31 (default = 0)
0 = RS 232
1 = RS 485 (default = 0)
0
NO CONNECTION